Table of Contents
Advertisement
CDJ-700S,CDJ-500S
6.1.2 ADJUSTMENT
Precautions for Test Mode
(1) If a soiled or damaged disc is played back and a GFS error is generated, the system may not perform a STOP operation and
may run out of control, although muting ON/OFF will be performed. If the system does run out of control, press the CUE key
to switch the power OFF.
(2) Do NOT press any key while an OPEN/CLAMP, SPINDLE KICK, or FOCUS SEARCH operation is in progress. Be sure to
wait until the operation is completed before calling the next operation.
(3) Key operation can be done only when the servo mechanism is in the Clamped position {door closed).
1. How to Start/Cancel Test Mode
TEST MODE: ON
TEST MODE: PLAY
| TesT Disc: YeDs-7
~
>>
;
»
0
&
a
mn
CLOSE ——»| OPEN}
4
Tracking servo
.
TEST MODE: DISPL
Switch status display
OFF
INSIDE SW
SERVO MECANISM
and Shutter
CLOSE SW
© OPEN or UP: 5%
OPEN SW
¢ CLOSE or DOWEN:
--
CLMP SW
44
Advertisement
Table of Contents
