Table of Contents
Advertisement
USING DETERGENT AND ADDITIVES
DETERGENT COMPARTMENTS
Detergent compartment for
washing phase.
If you use liquid detergent, put it
immediately before you start the
programme.
Compartment for liquid additives
(fabric conditioner, starch).
Flap for powder or liquid deter-
gent.
LIQUID OR POWDER DETERGENT
A
1. Measure out the de-
tergent and the fabric
conditioner.
2. Put the detergent
and the fabric condi-
tioner into the com-
partments.
3. Carefully close the
detergent drawer.
CAUTION! Do not
exceed the MAX
level.
The default position of
the flap is A (powder de-
tergent).
To use liquid detergent:
1. Remove the drawer.
Push the drawer edge in
the place with the arrow
(PUSH) to remove the
drawer easily.
B
When you use the liquid detergent:
•
Do not use gelatinous or thick liq-
uid detergents.
•
Do not put more liquid then 120
ml.
•
Do not set the delay start.
A
•
Measure out the detergent and the fabric condi-
tioner.
•
Put the detergent and the fabric conditioner into
the compartments.
•
Carefully close the detergent drawer.
ACTIVATING THE APPLIANCE
Press and hold for a couple of seconds the On/Off
button to activate or deactivate the appliance.
A tune sounds when the appliance is activated.
The display shows the word On.
SETTING A PROGRAMME
1. Touch the programme button
programme:
•
The indicator of the button
•
The display shows the programme duration.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message
2. Adjust the flap in posi-
tion B.
3. Put back the drawer in
the recess.
When the flap is in posi-
tion B and you want to
use powder detergent:
1. Remove the drawer.
2. Adjust the flap in po-
sition A.
3. Put back the drawer
in the recess.
and set the
flashes.
.
11
Advertisement
Table of Contents
