Pitch Bend Range - Roland ATELIER AT70 Owner's Manual

Hide thumbs Also See for ATELIER AT70:
Table of Contents

Advertisement

LEADING BASS:
The Leading Bass function will be active only while you are pressing the switch.
COMPOSER PLAY/STOP:
The switch will serve as a Play button/Stop button for the Composer. Performance
data will either start playing or stop with each press of the switch.
DAMPER OF UPPER:
While the switch is pressed, only the sound played using the Upper keyboard will
be sustained.
The action obtained with the other items will be the same as pressing the relevant
buttons on the panel.
@
Bender/Vibrato Destination
This setting specifies which Section (from the following three) you want to have the
effect applied to when you operate the Pitch Bend/Vibrato lever.
UPPER
: The effect is applied to what is played on the Upper keyboard.
LOWER
: The effect is applied to what is played on the Lower keyboard.
PEDAL BASS : The effect is applied to what is played on the Bass keyboard.
@ Pitch Bend Range
This setting allows you to choose the maximum amount of change (range) permissi-
ble when using pitch bend. The range can be set anywhere between 1-12 (in semi-
tone units; maximum of one octave).
* Manual Drums and Sound Effects are fixed at one octave, regardless of this setting.
@
Manual Drums Set
62
This setting allows you to choose one of the following eight Drum Sets.
STANDARD
ROOM |
POWER
ELECTRONIC
808
JAZZ
BRUSH
ORCHESTRA
2a
i
&
AA
fa
i £
TASS
i aE
SR
{Ste
sition
naitliioaneekinmin
siie
eerie
SRE
aera
SS
aa
=
i
uf
&
&
5
eo

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atelier at50

Table of Contents