Paging Code Memories - Kenwood TH-77A Instruction Manual

4-9-1. Paging Code Memories
Code setting Vv
: ' (ex)
There are seven paging code memories. F
Use
indicator
ie)
A Stores your station ID code in memory.
Automatically stores the calling station's |
0 code during reception. Can temporarily ~
set the code for the station to be called. Money TERber
1n5 Stores group codes and local station
codes in memory. yun nn Age --
APO
0,1,2,3,4,5,A | Tuning control
4-9-2. Setting the Paging Codes Y4E OR —GPe
1. Press the F key, then press the 6/M.DT key once or ay
twice until P is displayed. (Paging mode)
2. Press the SCAN key to enter the code setting mode. V =) =)
3. Select memories (A, 0 to 5) using the tuning control.
4. Enter the code (000 to 999) using the numeric keys. tee 000~999
5. Press the SCAN key again to exit the code setting yyone APoadad
mode.
Bi AP0
(Codes cannot be set for subband.)
End of code setting | SCAN
42