Table of Contents
Advertisement
MAINTENANCE
Lubrication
Flexible Drive Shaft
Level 1.
Parts required: Lithium Based Grease.
1.
Loosen clamping screws (A)
on driveshaft coupling.
2.
Remove handle and flexible
drive shaft.
3.
Remove flexible drive shaft
(B).
4.
Wipe flex shaft clean and
apply a thin coating of
grease.
5.
Slide flex shaft into handle.
Leave 2–3 inches of flex
shaft exposed. DO NOT get
dirt on flex shaft.
6.
Align flexible drive shaft with
drive shaft socket, and slide together until handle is fully seated into
drive shaft coupling.
7.
Tighten clamping screws (A).
38
DPPT-2600H
B
A
A
B
B
© 01/24 ECHO Incorporated
X7508310101
Advertisement
Table of Contents
