Panasonic PalmCam PV-DC2090 Operating Instructions Manual page 65

Remote Access (Windows 95/98)
• d I i i[_ _-t i_'_ ;[_l] dilll [e |
You can set the recording interval, image
mode and clock for time lapse recording.
Select [Time Lapse...] from the
Remote Access dialog box.
The time lapse dialog box will be
displayed.
_ _1¢olrd Mode_llt _Peal - .
R_melnin9 Inter_ll: _
NOFI_
73_ ImagelsJ Clock Se;up
y
FINE Year Monlh Day
NUPEN FIN[ Plotlr Minllle
dAfter setting is completed, click [OK]
to exit the Time Lapse dialog box.
• Changes made regarding the time
lapse function take effect by clicking
the [OK] button in the Time Lapse
dialog box.
If you select [Cancel], all settings are
cancelled.
When you wish to stop time lapse in
progress, repeat step 1 and set
Record to [OFF], then click [OK].
Set Record, Mode, Interval and Clock
Setup.
Record :
Select [ON] for time lapse recording.
If you are not going to use or wish to exit
time lapse recording, select [OFF].
Interval :
To set the recording time interval. A length
of 1 minute, 5 minutes, 10 minutes,
30 minutes, 1 hour, 6 hours, 12 hours and
24 hours can be set.
Mode :
Select the recording mode (see page 21).
Clock Setup :
To set the internal clock of the Camera.
Move the cursor and type the date and
time, Click [Clock PC] to set the Camera's
clock to the PC's clock setting,
Remaining :
Displays the number of images which can
be saved on the CF card.
65