Panasonic PalmCam PV-DC2090 Operating Instructions Manual page 19

Capturing Image,,
II ll+-ttllte II III_ l|Vl l_V+Vl IIP_ t=+ m
5, 6
J
LED
2
Lamp
\
1
LCD Vlewfinder
Set POWER to REC or MANUAL
REC.
• The LED Lamp lights up.
Press MENU to disNay REC MENU.
<RECMode> <I_ANUAL REC _/_
<REC MENU_ ,dMANUAL REC 1[$>
C_O SLOT NO. 1 CARD SL_ NO. 1
Ft,ASH AUTO FLASH ALI_O
SELF TIMER OFF 6E_TI_ER OFF
OTHER5 IRIS
SEL :.v SET :4, SEL :.V SET :_1,
Press ,dot • to select REC MODE
and select recording modes
(see page 21), press MENU to exit.
Press • (Tele) or • (Wide) to zoom
In and Out.
• Zoom magnification level is up to x3.
• There is no zoom indication on the
LCD Viewfinder.
5
6
Press SHTR down halfway to lock
Auto Focus.
• Beep sounds twice (see page 22).
Press SHTR down the rest of the way
to actually capture the image.
• Beep sounds once (see page 22).
• Whi_e the Digital Camera processes
theimage, the LED Lamp will flash
and then the captured image will be
displayed on the LCD Viewfinder for
a few seconds.
j B/W Full Feature
I o ,_f Indicator Panel
(Model PV-DC2590 Only)
For model PV-DC2590,
III Do step 1 above.
• Then, press REC MODE repeatedly to
select recording mode+
• Selected mode will be changed on ths
B/W Full Feature Indicator Panel
(see page 10).
• Now, do step 4 above.
1 _,