Making A Call With Sprint Pcs Voice Command - Sprint CDM-120 Phone Manual

Making a Call with Sprint PCS Voice
Command
Voice Command allows you to dial numbers, look-up contact
information, and open applications using your voice.
Call
1.
Press MENU > Tools > Voice > Voice Command, or press
and hold
2.
After you hear "Please say a command," say "Call."
3.
After you hear "Please say a name," say the name of a
Contacts entry.
4.
If you hear "Name is not recognized, please repeat
name," or if you hear "Recognition time is up, please try
again," then please try saying the name again or check
whether the name is registered in the phonebook.
5.
If you hear "Name not recognized. After the tone, speak
naturally and clearly without pausing," please try saying
the name again.
Digit Dial
1.
Press MENU > Tools > Voice > Voice Command >
Digit Dial, or press and hold
2.
After you hear "Please say a command," say "Digit Dial."
3.
After you hear "Please say a number," please say the
desired number to be dialed.
4.
If you hear "Recognition time is up. Please try again,"
speak again, naturally and clearly without pausing.
122 Section 3B: Sprint PCS Voice Command
in idle mode.
in idle mode.