Panasonic NV-DS11EN Operating Instructions Manual page 48

HTS MRA -
FY LATE RRS LORDS AAR
1 AP HAER » HS [OF F/ON] BEBE HE
[ON] °
REC ( 2 B ) =
JABS IER ©
a ee ia ot bey Be he TIS TS BS Hy
SARE DS LEILA,
PIL Ss AG
ENGLISH
Adding New Sound on a Recorded
Cassette (Audio Dubbing)
To perform audio dubbing, the Remote Controller is
necessary,
You can add music or narration on a recorded cassette.
It is not possible to perform audio dubbing onto
recordings made in the LP Mode. (+ 24)
1 Insert the recorded cassette and set the
[OFF/ON] Switch to [ON].
Make sure that the prevention slider of the cassette
is set to [REC].
2 Press the [VCR/CAMERA] Button so that
the [VCR] Lamp lights.
3 At the point from which you want to insert
the new sound, switch the Movie Camera
over to the Stiil Playback Mode.
Using Cue Playback or Review Playback makes it
easy to search for this point.
4 Press the [A.DUB] Button on the Remote
Controller.
5 Press the Pause Button [11] on the Remote
Controller to start audio dubbing.
Stopping Audio Dubbing
Press the Pause Button [IN] on the Remote Controller.
The Movie Camera is again in the Stili Playback Mode