Use Of Controls - Zanussi TD 245 Instruction Booklet

Dual temperature
Hide thumbs Also See for TD 245:
Table of Contents

Advertisement

USE OF CONTROLS
1. Programme Chart
This will help you to select the correct time for drying.
2. Mains On Light
This lights up when a programme is selected and will
go out when drying is completed.
3. Drying time selector dial
The selector dial is marked with times in minutes
corresponding with those on the Drying Times Chart
(Page 9).
To set the machine to the selected time, turn the dial
clockwise until the time you want coincides exactly
with the pointer.
NEVER attempt to turn the dial in an anticlockwise
direction.
The selector incorporates two drying cycles, one of
up to 120 minutes at a high temperature for natural
fabrics, and one of up to 80 minutes at a low temper¬
ature for synthetic fabrics.
The selected time can be extended when the original
programme is completed, by resetting the knob for a
further period of drying. It is better to select a time
which is too short and then set the dial for a further
period if necessary.
Select the drying time according to the programme
guide.
Remember that during the last 8 minutes of the oper¬
ation the heat is cut off in order to carry out a fabric
cooling phase, which prevents any creasing or
crumpling of fabrics.
Note
This tumble dryer incorporates a special child safety
feature.
At the top, on the inside of the porthole door, you will
notice a red catch, if this is removed it will prevent the
machine from working. To remove, press the catch
downwards (see picture). You MUST replace the
catch to enable the appliance to work.
We advise that when the appliance is not in use it
should be unplugged from the electricity supply.
8

Advertisement

Table of Contents
loading

Table of Contents