Date Imprinting (Date Model Only); Date Print Setting.20; Date And Time Adjustment.20 - Pentax IQZoom 60S Operating Manual

DATE IMPRINTING (DATE MODEL ONLY)
DATE PRINT SETTING (Fig. A)
Press the mode button to select the date,
time, and whether or not to print it on the
film.
♦
The date unit must be reset after replac¬
ing the battery.
(Fig. A)
AUTO DATE
MODESiLiCTStT
>o o
^ Year/Month/Day
N IS
Dayi^our/Minute
Non Record
^ Monttii/Day/Year
J 'n
1
1
T U I
I DayAionlh/Year
DATE AND TIME
ADJUSTMENT (Fig. B)
(1) Press the mode button until the year,
month, and day appear on the display.
(2) Press the select button to choose which
number blinks.
(3) Press the set button to change the blink¬
ing number.
• Press the set button repeatedly until the
desired number is set.
(1) Repeat steps (2) and (3) until the year,
month, and day are all correct.
(2) Press the select button again after all of
the numbers have been changed. The
numbers will stop blinking and the
"ready" symbol ( - ) will appear above
the numbers. The camera is now ready
to be used.
• If you want to change the time, press
the mode button to display the day,
hour, and minute.
20