Using The Self-Timer.1; Auto Film Rewind; Mid-Roll Rewind - Pentax IQZoom 60S Operating Manual

Hide thumbs Also See for IQZoom 60S:
Table of Contents

Advertisement

USING THE SELF-TIMER O
1. Compose your picture with the camera on a
steady support.
2. Press the mode switch until O appears on
the LCD panel. Press the shutter release
button. The self-timer LED which is located
on the front of your camera, will blink for
approximately 7 seconds, the LED will light
on for about 3 seconds to indicate that the
shutter will be released and then the shutter
will release.
• The self-timer can cancelled by pressing
the shutter release button again, or by turn¬
ing off the power before shutter release.
AUTO FILM REWIND
1. The film will automatically rewind when the
end of the roll is reached and the lens will
retract into the camera.
2. Rewinding will automatically stop after the
film is completely rewound, and "0" and
"®" will blink on the film counter LCD.
Make sure that the blinking ® appears
before opening the back cover. Open the
back cover and remove the film.
• If the film has gone past the standard num¬
ber of exposures, the final two pictures may
be double exposed.
• If "0" does not display on the LCD counter
after rewinding, press the mid-roll rewind
button.
MID-ROLL REWIND (Fig. 16)
The film may be rewound before the roll is fin¬
ished.
Use the protruding part of the strap clip to
press mid-roll rewind button to rewind the film.
19

Advertisement

Table of Contents
loading

Table of Contents