Priority Function - Sony AIR-7 Operating Instructions Manual

Air band/fm/am pll synthesized receiver
Hide thumbs Also See for AIR-7:
Table of Contents

Advertisement

e The sequence of programmed scanning is factory set as follows.
@ Since only 10 keys can be programmed, even if the eleventh key
is pressed, it is not programmed.
@ The program
function
can
be activated and cancelled
while
another station is being received.
To cancel the program function
AIR/PSB reception |
PRIORITY FUNCTION
If you are particularly interested in listening to a certain station,
designate it as the priority station.
The set automatically tunes to the station every 3 seconds to check
whether there is a signal or not, even while another station is being
received.
To designate the priority station
Memorize frequencies to all counter keys.
While pressing the PRIORITY key, press the counter key to which
the desired frequency is memorized.
:
If more than two counter
keys are pressed, the last key pressed
designates the priority station.
Blinks to indicate
that priority
function is activated at ©.
the priority station
Ka
@
.
%6)
\
\
GO
©
@ The PRIORITY indication appears in the display.
A beep sounds and the corresponding dot blinks.
@ When the priority station is tuned in every 3 seconds, the station
being received will be interrupted for a fraction of a second.
ip 2
LUT
so akse
fo
€L4 Live
70 80 90
PRIORITY
0@
air if
To cancel the priority station
Press the PRIORITY key again. The PRIORITY indication and the
dot in the display disappear.
@ The
priority function
can
be activated
and cancelled
while
another station is being received.
21

Advertisement

Table of Contents
loading

Table of Contents