1. The Unifier, Customizer or
Automator remote control sends
RF (radio frequency) signals to the
Expander, which is an RF receiver.
2. The Expander converts RF to IR (infrared) commands and
sends them out to components in the same cabinet space via
the built-in front blaster.
3. Self-adhesive "flashers" (included in the
Expander kit) affix to the front panels of your com-
ponents. The flashers relay commands to compo-
nents out of sight of the MRF-100 front blaster. The
flashers plug in to the MRF-100 rear flasher line
output jacks. Each flasher has a 10' cable to easily
reach components on nearby shelves.
2