Yamaha DS55 Operation Manual page 22

Key (Type} Numbers when
IPTRNI is Selected
Key Numbers when
[KEY] is Selected
20 AUTO PERFORMANCE
y "Type" is the selected pattern
Type : 01 <—— type for IPTRN].
<Cruise »>[PTRN]
"Key" is the selected pattern for
[KEY]
"Oct" is the octave range of the
arpeggio for [ARPE]
Change patterns (or arpeggios) using the left hand while playing the melody with
the right hand. In the case of PATTERN CHANGE and KEY SHIFT patterns, the
pattern will normally change after it has played through to the end (1 to 4 meas-
ures) once a new key is pressed. If you want the pattern to change immediately a
new key is played, press the "SYNC" button after the Auto Performance sequence
has been started ("Sync* will appear to the right of the upper line on the LCD). This
"Sync" mode can be turned on and off while playing by pressing the "SYNC* button.
Type : O1 Syne
<Cruise >[PTRN]
The Auto Performance sequence can be stopped at any time by pressing the
AUTO PERFORMANCE START/STOP button. To select a different Auto Perform-
ance sequence, press the AUTO PERFORMANCE SELECT key and select as de-
scribed above.
Note:
MIDI data cannot be received while an Auto Performance sequence or
demonstration is playing.
FA
¡y