Yamaha DS55 Operation Manual page 11

Hide thumbs Also See for DS55:
Table of Contents

Advertisement

THE DUAL PLAY
MODE
e
Assigning Dual-mode Voices
and Setting Detune
You can now select a new voice for the upper section of the keyboard: select the
desired voice bank using the PRESET or USER buttons, then use the -1 and +1 or
number (0 through 9) buttons to select a voice as described in "Selecting Voices"
on page 7.
After selecting a new upper voice, press the SPLIT button again to move ahead to
the split point display:
Assign SPLIT mode split point.
PLAY
SPLIT
point
point
=
C3
Current split point key.
Immediately after this display appears you can select the desired split point by
pressing the corresponding key on the DS55 keyboard. This method can only be
used once after the split point display has been selected. Further changes to the
split point can be made by using the -1 and +1 buttons.
Press the SPLIT button again to return to the first SPLIT PLAY display. The voice
and split point assignments are stored in the DS55's memory, and will be recalled
whenever you enter the SPLIT PLAY mode from any other mode —
until new
assignments are made.
The DUAL PLAY mode allows you to combine and play two voices from any of the
DS55 voice banks across the entire keyboard. You can also specify an amount of
"detune" between the two voices used, creating a thicker, distinctly ''multi-instru-
ment" sound. Up to 4 notes can be played simultaneously in the DUAL PLAY
mode.
Press the DUAL button in the PLAY MODE group to enter the DUAL PLAY mode.
D
U11
1stVoice
Bank, number and name of 1st voice.
ASS
2ndVoice
Bank, number and name of 2nd voice.
After you've selected the DUAL PLAY mode by pressing the DUAL
button, as
described above, pressing the DUAL button again causes a display similar to the
following to appear:
Assign 1st DUAL mode voice.
PLAY
DUAL
tone
1
U11
FirstVoice
Currently selected 1st voice name.
Currently selected 1st voice bank and number.
You can now select a new 1st voice for the DUAL PLAY mode: select the desired
voice bank using the PRESET or USER buttons, then use the -1 and +1 or number
(0 through 9) buttons to select a voice as described in "Selecting Voices" on page
7.
THE PLAY MODES, TUNING & DELAY
9

Advertisement

Table of Contents
loading

Table of Contents