Table of Contents
Advertisement
|
PD-M602/PD-M702
*PD-M552 only
W—______
2
PD-M502/PD-M552
PD-M602/PD-M702
PD-M552/PD-M602 only
28e NUMBER
—
fl
m xcept for PD-M502
=
RACK
cS
Except for PD-M502
Gheeieech a
3" PD-M602 (U.K. model)/
PD-IM702 only
PROGRAM PLAYBACK - TO PROGRAM
TRACKS/DISCS IN DESIRED ORDER
1. During stop mode, press the PROGRAM button:
The PROGRAM
indicator lights and "DISC?" appears on the
display.
2. Press the disc number button which contains the
tracks to be programmed.
"AL"
(all tracks} appears
and then the display shows
"TRACK?". To program entire discs, enter the desired disc
numbers with the disc number buttons and go to step 4,
3. Press the 4
<< or h>
PP! button so that the
desired track No. appears on the display and press
the PROGRAM button.
[PD-M602 (U.K. model)/PD-M702 only]
3'. Enter the track No. to be programmed with the digit
buttons.
Only during stop mode, you can use the 4
<< oF pe
Pri button. After selecting the track No., be sure to press
the PROGRAM button.
Repeat steps 2 and 3 (or 3') to program other tracks.
5. Press the » button.
The tracks are played in the programmed order. When ail
programmed
tracks have been played, the player enters
stop mode.
al
NOTE:
When the tracks is selected with the -t<@
<< or >>
>>!
button in step 3, the displayed track No, is automatically
programmed if the 4
<< or »>
mw;
button is not pressed
within 2 seconds. Therefore, be sure to press the #t<@
<4 or
be Pi button sequentially until the desired track No. appears
on the display.
To stop Program playback, Press the @ button,
To exit program mode:
During program
playback, select a disc No. with the disc
number button and then press the » button. The player enters
normal playback mode and playback starts from the beginning
of the selected disc.
e
Programs containing up to 32 steps can be created.
®
To go to the previous or next step in a program, press the
kd <<
Of BE PPI button.
e
To enter track No. 11 or above with the digit buttons, see
"Track Search"
on page
11. (PD-M602
[U.K. model]/PD-
M702 only)
e
if the magazine is in the player, the program contents will
not be erased even if the power is turned off.
NOTE:
During Delete programming
or Time fade editing the PRO-
GRAM button cannot be operated.
13
<PRB1184>
En
Advertisement
Table of Contents
