Table of Contents
Advertisement
COOKING INSTRUCTIONS
The IEC Power Output rating is an internationally standardised rating, so all
microwave manufacturers now use the same method of measuring power
output.
If food packaging gives cooking instructions based on IEC Power ratings,
set cooking times according to the IEC Power of your oven.
For example :
If the cooking instructions are based on a 650W oven, then you will need
to reduce some cooking time for the MW87L (850W) Ready meals are now
very convenient and popular. These are meals which are already prepared
and cooked by the food manufacturer, and then frozen, chilled or vacuum
sealed for long life.
Increasingly, heating times for such ready meals are being based on the
Heating Categories A, B, C, D and E.
On this instance, simply match the heating category of your oven to the
instructions on the food package, and set your timer accordingly.
For example : If the heating instructions are 3 minutes on HIGH for a D
category oven, then you will need to set your timer for less than 3 minutes
on HIGH for the MJ26A6093 (E category).
Always remember that cooking instructions are intended only as a guide.
If you have followed the instructions and the food is still not piping hot
throughout, simply return it to the oven and cook it until it is.
COOKING/REHEATING
One-stage cooking
Make sure the oven is plugged into a properly earthed electrical outlet.
Open the door(The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven and
then close the door securely (The oven lamp will go off.).
1. Select the desired power level by pressing the
Power Level Selector pad.
Result :
The selected power level will be
displayed in the display window.
2. Set the desired heating time by pressing the
NUMBER pads.
Result :
The selected time is displayed in the
display window.
The maximum time according to each cooking power level can be
referred to in the title "Power Levels ans Time Variations" on page 9. The
NUMBER pads will not operate or respond when you press a cooking
time exceeding the maximum value. It is not possible to set a cooking
time for longer than the maximum time allowed on the chosen program.
It is advisable to press CANCEL and to enter a new power level and
cooking time.
3. Press the
button.
Result :
The oven lamp and cooling fan will be
turned on. Heating will start. The time
on digital display will count down.
When all time is elapsed, the end of cycle Beep Tone will sound 4 times
and all heating will stop.
The oven lamp will go off. For 1 min, the cooling fan will keep working
in order to cool down the interior parts. During the time, the fan will not
stop even when you open the door. 1 min later it will stop. Food may be
removed from oven whilst the fan is still running.
During the time, the fan will not stop even when you open the door. 1
min later it will stop. Food may be removed from oven whilst the fan is
still running.
4. Open the door and take the food out.
Close the door. The oven lamp will go off.
Whilst in a heating cycle, one press on (
can restart it by pressing the (
will cancel the selected program. While NOT in a heating cycle, one tap
on (
) pad cancels the selected program.
You can press +20s pad one or more times in order to add the cooking
time by 20 seconds. But you can not exceed the maximum time per
power level allowed for power level selected.
When you first plug in the power cord, the oven beeps once and all the
indicators show for 5 sec in the display window.
When heating cycle is completed and you open the door, the oven lamp
automatically turns on and goes off 5 min later.
When you open the door whilst in a heating cycle, the oven stops
operating and the oven lamp automatically turns on for 5 min and goes
off 5 min later. If you leave the oven door open for more than 1 min, the
oven beeps once every minute.
8
) pad stops the oven. You
) button or a second press on (
) pad
Advertisement
Table of Contents
