Panasonic Quasar W-1301 Operating Instructions Manual page 8

• Connect the Cable from Antenna / Cable to the VHF / UHF
terminal on unit.
WARNING:
UNIT
When using "Nut type" RF coaxial cables,
tighten with fingers only. Overtightening
may
damage
term nas.
VHF/UHF
IN from
ANT./CABLE
Press POWER on the remote or unit.
When the unit is turned on the first time,
SELECT LANGUAGE screen appears.
4
Press OH • to start
CHANNEL / CLOCK AUTO
SET operation. Settings are
performed automatically.
If the setup is completed, the
following screen is displayed.
If wrong language is set, complete "Reset all unit
Memory Functions" steps page 9.
Press OH • to select English.
OR
Press CH Yto select Spanish (EspaSol).
OR
Press VOL + to select French (Fran£;ais).
CHANNEL!CLOCK AUTOSETscreen appears.
If AUTO CLOCK SET IS
INCOMPLETE screen
appears, set the clock using
MANUAL CLOCK SET
procedure on page 9.
8