Panasonic KX-MB283BR Service Manual page 63

4. Adjust the recording paper guides. Pinch the front side of the recording
paper guide (4), then slide it to match the paper size mark. Pinch the
right side of the recording paper guide (5), then slide it to adjust the
width to the size of the recording paper.
• Make sure that the recording paper is under the paper limit mark
(6), and the paper should not be loaded over the snubbers (7).
5. Insert the paper input tray to the unit, lifting the front part of the tray.
Then push it completely into the unit.
Note:
• If the paper is not loaded correctly, re-adjust the paper guides, or
the paper may jam.
• If the paper input tray does not close, the plate in the paper input
tray may be lifted. Push the paper and make sure that the paper is
laid flat in the paper input tray.
Caution for the paper input tray
• Do not drop the paper input tray.
• Hold the paper input tray with both hands when removing or install-
ing. The paper input tray weighs approximately 2 kg when the
recording paper is fully installed.
63
KX-MB283BR