Entering/Editing Edacs Channel Groups; Entering/Editing Edacs Channels - Uniden BCD396T Owner's Manual

Input a system frequency, then press the scroll control.
The scanner then prompts you to enter the LCN for
the entered frequency. Enter the LCN, then press the
scroll control.
To enter additional frequencies, press
scroll control to select New Frequency, then repeat
the above.
Note: The scanner only accepts a single frequency
and no LCN for SCAT systems.

Entering/Editing EDACS Channel Groups

To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Setting Up a Channel Group
Program System
Menu
Select the system
Edit Group
The scanner creates a group with a default name of
Group nn. nn increments by one for each new group
you create within a system.
Next, refer to the appropriate section to set group-wide
options:
• See "Entering/Editing the Group Name" on
Page 84
• See "Setting the Group Quick Key" on Page 85
• See "Deleting Groups" on Page 85
• See "Editing the Channel Name" on Page 86
• See "Setting Group Lockout" on Page 85

Entering/Editing EDACS Channels

Program System
Menu
Select the system
Edit Group
Programming Radio Systems
, use the
Menu
69