Programming Edacs Systems - Uniden BCD396T Owner's Manual

Enter a talk group ID
Note: You can enter I-Calls by pressing
I-Call number. You can enter the I-Call wild card by
pressing then 0.
Refer to the appropriate section to change a
channel setting:
• See "Adjusting the P25 Level (Motorola and Con-
ventional Systems Only)" on Page 81
• See "Editing the Channel Name" on Page 86
• See "Editing the Talk Group ID (Trunked Channels
Only)" on Page 88
• See "Setting Channel Lockout" on Page 91
• See "Deleting Channels" on Page 92
• See "Copying/Pasting Channels" on Page 92
To program another channel within the same group,
press , then repeat the above. To create another
Menu
channel group and enter more channels, press
three times, then proceed from "Entering/Editing
Motorola Channel Groups" on Page 66.

Programming EDACS Systems

Program System
Menu
New System
EDCS
Confirm? Yes="E" / No="."
Next, rotate the scroll control to select the type of
EDACS system you want to program, then briefly
press the scroll control to select it.
• WIDE - Use for wideband EDACS systems
• NARROW - Use for narrowband EDACS systems
• SCAT - Use for EDACS SCAT (Single Channel
Autonomous Trunking)
Confirm? Yes="E" / No="."
The scanner creates an empty EDACS system, with a
default name of System n
Programming Radio Systems
then the
Menu
E.
67