Table of Contents
Advertisement
3.
Plug the AC Adapter cord into the 9V DC input jack
on the Base Unit.
4.
Place the AC Adapter cord around the strain relief.
5.
Plug the other end of the telephone cord into the
telephone jack on the wall.
6.
Plug the AC Adapter into a standard 120V AC wall
outlet.
Note: Do not use an outlet controlled by a wall
switch.
Use only the Uniden AC Adapter supplied
with this phone.
11
RING VOL
PULSE-TONE DC IN 9V
TEL LINE
OFF-LO-HI
Advertisement
Table of Contents
Troubleshooting
