Kawai MP9500 Owner's Manual page 10

MP9500 REAR PANEL
1. OUTPUTS
FIXED OUTPUTS
The XLR outputs are used to connect the MP9500 to professional audio
equipment.
These jacks eliminate the need for direct boxes when connecting
the MP9500 to a PA system or recording console.
The (Master) VOLUME fader
and the EQ settings DO NOT affect these outputs.
NORMAL OUTPUTS
2. PHONES
The PHONE
output is used to connect a set of headphones to the MP9500.
using a standard stereo 1/4 inch phone jack.
3. FOOT CONTROLLERS
EXP JACK
An expression pedal can be connected to this jack.
The expression pedal can be assigned to different MIDI control numbers in
the system menu.
FSW JACK
4. DAMPER / SOFT JACK
This jack is used to connect the Foot Pedal included with the MP9500. (Kawai
F-2r)
I]
S Pi
Note:
When the Rotary EFX is in use, the Soft pedal changes function to a
Fast/Slow Rotor switch.
5. MIDI JACKS
6. POWER SWITCH
Turns the MP9500 ON or OFE
7. POWER RECEPTACLE
10