Table of Contents
Advertisement
Appliance stores last
connection configuration. To
use wireless features of the
appliance the wireless
connection must be in
mode.
To remove the wireless credentials,
touch and hold down Inici. Remoto/
Remota button for around 10 seconds
until you hear 2 'beeps' sound. The
symbol:
display.
5.4
Remote Start
My AEG Care allows you to
control your laundry through
a mobile device.
It contains a large number of
programmes, useful features
and product information
tailored perfectly to the
appliance.
Through the app you can
select the programmes
already available from the
appliance control panel, plus
unlock additional
programmes available only
from a mobile device.
Additional programmes can
change over the time along
with new versions of the
app.
It's personalized laundry
care - all from your mobile
device.
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Inicio/Pausa
button to start the program,
but it is also possible to start
a drying program remotely.
Remote Start activation
Once the My AEG Care app is installed
and the wireless connection is complete,
you can activate the Remote Start:
appears on the
1. Press the
Inici. Remoto/Remota
button and the
start blinking for a few seconds.
2. Press the Inicio/Pausa button to
activate the Remote Start.
The indicator
appears on the display.
Now it is possible to start the program
remotely.
Remote Start deactivation
Press the
Inici. Remoto/Remota
button and confirm by pressing the
Inicio/Pausa.
The
icon is off and the remote start is
deactivated.
If the door is open, the
Remote Start is deactivated.
Pressing On/Off button
deactivates the Remote
Start.
5.5 Over-the-air update
WARNING!
During the update it is highly
recommended to not turn off
or unplug the appliance.
The App may propose an update for
downloading new features.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
5.6 Wi-Fi Always On
The Wi-Fi Always On function can be
activated only via My AEG Care app.
ENGLISH
13
indicator will
Advertisement
Table of Contents
