Table of Contents
Advertisement
AXIS Q60-E Series
Setup
Note
If you set the shift to occur when it's brighter, the image remains sharper as there will be less low-light noise. If you set
the shift to occur when it's darker, the image colors are maintained for longer, but there will be more image blur due
to low-light noise.
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
Note
A high max shutter value can result in motion blur.
•
To slow down the shutter speed, set max shutter to the highest possible value.
•
Set the max gain to a lower value.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
1. Go to Settings > Image > Wide dynamic range.
2. If required, turn on WDR.
3. To set the amount of WDR, select Low, Medium or High from the WDR level list.
Image without WDR.
Image with WDR.
Note
WDR may cause artifacts in the image.
7
Advertisement
Table of Contents
