Installing And Adjusting Your Phone; Desk/Tabletop Installation - Uniden EXT 1760 Owner's Manual

TIP
When choosing a location for
your phone, keep the base
unit and the handset away
from electrical noise caused
by objects like motors and
fluorescent lighting.
4

Installing and Adjusting Your Phone

DESK/TABLETOP INSTALLATION

1) Plug the AC adapter cord into the
DC input jack on the back of
the base, then place the AC
adapter cord inside the molded
strain relief.
2) Plug one end of the long
telephone cord into the TEL LINE
jack on the base, then place the
telephone cord into the right
molded channel cord holder.
3) Plug the other end of the long
telephone cord into the telephone
wall jack. (Remember, the phone
must be fully charged before you
can use it.)