Table of Contents
Advertisement
2) Remove the wall mount adapter
from the notches at the top of
the base.
3) Rotate the wall mount adapter
180 degrees and snap it into place at
the bottom of the base.
4) Plug the AC adapter into the base.
5) Put the AC adapter cord inside the
molded wiring channel, then wrap
the AC adapter cord around the
strain relief notch. Plug the AC
adapter into a standard
120 VAC wall outlet.
6) Plug one end of the long telephone
cord into the
TEL LINE
back of the base, then plug the other
end into a standard telephone jack.
jack on the
7
Advertisement
Table of Contents
