Table of Contents
Advertisement
NOTE
You can record up to a
30-second OGM.
TIP
Stand approximately 12
inches in front of the
microphone and speak
clearly when recording
your outgoing message.
SETTING YOUR OUTGOING MESSAGE (OGM)
When you receive a call, the answering system automatically plays
either a preset message or your own personal outgoing message.
Preset message
The following message is prerecorded at the factory:
"Hello, no one is available to take your call. Please leave a message
after the tone".
To record your own OGM, follow the steps below.
Recording your personal OGM
1) Press and hold
ogm
a long tone. Start recording your
message after you hear the long tone
and the message counter LED blinks.
2) When you are finished recording your message, press
A tone sounds and your message plays back on the base speaker.
NOTE: To choose between the prerecorded outgoing
message and your personal outgoing message, press
during outgoing message playback. This switches between
the two options.
until you hear
again.
ogm
ogm
23
Advertisement
Table of Contents
