Specifications - Braun K 650 Manual

Our products are engineered to meet
the highest standards of quality,
functionality and design. We hope you
thoroughly enjoy your new Braun
appliance.
Important
• The blade 9 is very sharp! Take
hold of the blade by the knob only.
After use, always first remove the
blade from the food processor bowl
6 before removing the processed
food.
• Make sure that your voltage
corresponds to the voltage printed on
the bottom of the appliance. Connect
to alternating current (AC) only.
• Keep the appliance out of the reach
of children.
• This appliance has a polarized plug
(one blade is wider than the other). To
reduce the risk of electric shock, this
plug will fit in a polarized outlet only
one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician. Do not attempt to defeat
this safety feature.
• This appliance was constructed for
household use only to process the
listed quantities.
• Do not use any parts in the micro-
wave oven.
• Do not allow the appliance to operate
unsupervised.
• Braun appliances meet applicable
safety standards. Repairs on electric
appliances must only be done by
authorized service personnel. Faulty,
unqualified repair work may cause
accidents or injury to the user.
• Switch the appliance off and
disconnect it from the outlet before
storing it.
Specifications
• Voltage/wattage: See typeplate on
the bottom of the appliance.
• Operating time and maximum
capacity: See processing
instructions.
Description
The Braun Multiquick 3 meets the
highest demands for kneading, mixing,
blending, chopping, slicing, shredding
and grating, simply and quickly.
1 Motor base
2 Cord storage
3 Motor switch (On = I, off = off/0)
4 Pulse mode « »
5 Variable speed regulator (1–15)
6 Food processor bowl (2 L / 2 qt
capacity)
7 Food processor bowl lid
8 Food pusher 7
Attachments for food processor
bowl 6
(Important: Not all attachments will be
included in the standard equipment of
all models.)
9
Blade with protective cover
j
Blade holder
q
Fine slicing blade – a
l
Coarse slicing blade – b
m
Fine shredding blade – c
n
Coarse shredding blade – d
o
Grating blade – e
p
French-fry disc
q
Kneading hook
r
Whipping attachment
Note: Before using the food processor
for the first time, clean all parts as
described under «Cleaning».
Overload protection
In order to avoid damages caused by
overload, this appliance is equipped
with an automatic security switch which
shuts off the current supply if necessary.
In such case, turn the motor switch
back to «off/0» and wait approximately
15 minutes to allow the motor to cool off
before switching the appliance on again.
4
Pulse mode « »
The pulse mode is useful for the follow-
ing applications:
• Chopping delicate and soft food,
e.g., eggs, onions or parsley.
• Carefully folding flour into dough or
batter to maintain the creaminess.
• Adding whipped eggs or cream to
solid food.
The pulse mode « » is activated by
pressing the blue knob
motor switch with switch setting at
«off/0».
Before activating the pulse mode, set
the desired speed with the speed regu-
5
lator . When releasing the blue pulse
4
knob , the appliance is switched off.
Recommended speed
ranges for individual
attachments
Set the speed range by means of the
variable speed regulator
mended to first select the speed and
then switch on the appliance in order to
work with the desired speed from the
start.
Attachments
Kneading hook
6
Blade
Whipping attachment:
– egg whites
– cream
Slicing, grating and
shredding blades
French-fry disc
(please refer to food icons to be
stickered on the motor base for
guidance)
Double safety feature:
The appliance can only be switched on
when the food processor bowl with lid is
properly engaged. If the lid is unlocked
during operation, the motor switches
off automatically. If this occurs and the
motor switch
to «off/0» to avoid switching on the
motor accidentally.
Attaching the food
processor bowl
the lid
1. With the motor switched off, place
the food processor bowl onto the drive
position of the base
arrow on the bowl with the arrow on
the base (A). Then turn the bowl in the
3
«function» direction as far as it will go.
A
2. Put the attachment needed (see
instructions for each of the attachments)
onto the drive shaft of the bowl and
push it down as far as it will go until it
clicks into place.
4
on the
5
. It is recom-
Speed range
7
6–15
4–5
2
1–8
1–3
3
is still on «I», turn it back
6
and
7
1
matching the
1
2
5