Uniden EXP91 Operating Manual page 13

6. Place the Base Unit on the
screws and push down until it's
firmly seated.
After the unit is mounted, raise
the antenna.
7. Plug the other end of the
telephone line into the
telephone wall jack.
8. Plug the AC Adapter into a
standard 120V AC wall outlet.
Note: Use only the AC Adapter supplied with the EXP91.
Route the telephone and power cords where they will not create
a trip hazard, or where they could become chafed and create a
fire or other electrical hazards.
AC
ADAPTER
13
AC ADAPTOR
SEE OWNER'S MANUAL
93scwmt
93teljk
Wide
Blade
widblde1