Desk Or Tabletop Installation; Wall Installation; Setting The Handset Retainer For Wall Mounting; Mounting On A Standard Wall Plate - Uniden EXP6900 Owner's Manual

Color profile: Disabled
Composite Default screen

Desk or Tabletop Installation

1. Plug the AC adapter cord into the 9V DC input jack on
the base.
2. Wrap the AC adapter cord inside the molded strain-relief.
3. Plug one end of the long telephone cord into the TEL LINE
jack on the base.
4. Place the telephone cord into the right molded channel
cord holder.
5. Plug the other end of the telephone cord into the telephone
wall jack. (Remember, the phone must be fully charged
before you can use it.)
6. Plug the AC adapter into a standard 120V AC wall outlet that is
not controlled by a wall switch.
Use only the AC adapter that came with
the phone.
7. Raise the antenna on
the base.

Wall Installation

MSetting the Handset Retainer for Wall Mounting
1. Remove the handset
retainer on the base by
sliding it upward.
C:\Manuals\EXP6900\Exp6900 om.vp
Fri Feb 18 11:07:26 2000
2. Flip the retainer over so
the tab is facing up.
3. Slide the retainer back
onto the base.
MMounting on a Standard Wall Plate
The phone is designed to be mounted on a standard wall plate.
1. Plug the AC adapter into the base.
2. Place the AC adapter cord inside the left molded channel
cord holder.
3. Plug a short telephone cord into the TEL LINE jack on
the base.
4. Place the telephone cord into the right molded channel
cord holder and plug the other end of the cord into the wall
jack. (Remember, the phone must be fully charged before
you can use it.)
5. Place the base on the two posts of the wall plate and slide
downward to secure.
6. Plug the AC adapter into a standard 120V AC wall outlet that is
not controlled by a wall switch.
Use only the AC adapter that came with
the phone.
7. Raise the antenna on the base.
6