Brake Pedals; Foot Throttle Pedal - New Holland Boomer 45 Operator's Manual

Brake pedals

WARNING
Loss of control hazard!
Always reduce the traveling speed and use the steering wheel while you make a turn. When you oper-
ate the machine at high speeds, never attempt to make sharp turns by using the turning brake pedals.
If you use the individual brakes at high speeds, the machine could become machine unstable.
Failure to comply could result in death or serious injury.
The right brake pedal controls the braking action of the
right rear wheel. The left brake pedal controls the braking
action of the left rear wheel.
The brake pedal functions are identical for the HST and
mechanical transmission model tractors except for the lo-
cation of the pedals. The brake pedals (1) on a HST model
tractor are located on the left-hand side of the operator's
platform and the brake pedals (2) on a mechanical model
tractor are located on the right-hand side of the operator's
platform.
Depress both pedals simultaneously to stop the tractor.
To assist in making sharp turns at slow speed, depress
the right or left brake pedal as required.
The brake pedal connecting pin (3) secures the brake
pedals together. Lock the pedals together whenever you
operate the tractor at high speeds or when the tractor is
used on the highway.

Foot throttle pedal

The foot throttle pedal (1) located on the right-hand side of
the operator's platform of mechanical transmission model
tractors, will be used independently of the hand throttle
lever to control the speed of the tractor.
When using the foot throttle pedal, place the hand throttle
lever in the (low idle) rearward position.
NOTE: Use the foot throttle pedal when driving tractor on
public roads.
3 - CONTROLS AND INSTRUMENTS
3-29
W1237A
1
NHIL13CT01173AA
2
NHIL13CT01055AA
1
NHIL15CT00840AA