Advertisement
Operating the Swivel Kit
To direct the flow of material from the cross conveyor
in any direction, pull up the spring-loaded locking pin
on the swivel kit into the unlock or open position. This
allows you to manually move the cross conveyor freely
from side to side on the swivel bearing
To keep the cross conveyor in a fixed position, release
the spring-loaded locking pin into one of the five
locking positions on the swivel kit.
Note:
When traveling over uneven terrain, raise
the machine to the maximum safe traveling range.
This provides more ground clearance for the cross
conveyor/swivel.
1. Hydraulic controls
2.
Arrow
(Figure
Figure 6
3. Cylinder
5).
g015027
8
Advertisement
