Setting The Pulse/Tone Switch; Adjusting The Ringer And Volume Controls - Uniden EXI6960 Owner's Manual

TIP
Most phone systems use tone
dialing. Check with your
local phone company if
you're not sure whether your
system is tone or pulse.
NOTE
You can only adjust the
volume settings during a call.
12

SETTING THE PULSE/TONE SWITCH

Be sure the PULSE/TONE switch
is in the TONE position unless
your local phone system uses
pulse dialing.

ADJUSTING THE RINGER AND VOLUME CONTROLS

Handset Ringer Tone and Volume
M
Your EXI 6960 lets you choose from
two ringer tones, Type A and Type B.
Each tone has a low and high volume
setting. When the phone is in standby
mode, press the L or M key on the handset to select the handset
vol
ringer tone and volume. As you change the settings, the selection appears
on the LCD.
Handset Earpiece Volume
M
The EXI 6960 comes with four volume settings for the handset earpiece
- normal, medium, high and loud. The Loud setting is especially useful
in places with a lot of background noise, or for the
hearing impaired.
Normal, Medium, High
During a call, press
vol
the earpiece volume, press
decrease the earpiece volume. As you
increase or decrease the volume, your selection appears on the LCD.
When you hang up, the EXI 6960 keeps the last volume setting selected.
L to increase
M to
vol
P U
L S
E -
T O
N E
Ring Type B
High
<High>