Table of Contents
Advertisement
At the preset time, the selected channel will appear on the
screen and the TIMER indicator will go out. The TIMER will
operate whether you are watching a TV program or a VCR
playback, or even if you have turned off the TV.
\f no button* is pressed within 2 hours after the preset time,
an "OFF" indication will appear on the screen for 1 minute.
If a button" is still not touched during the 1 minute, the TV
will turn off automatically as a safety precaution.
* AUTO STEREO selector and HUE, COLOR, BRIGHT and
SHARPNESS
controls excepted.
The TIMER operates only once, but the time and the chan-
fel will remain in the set's memory.
If, at a future date, you want to see the same channel at
the same time, press TIMER OFF/REPEAT. The TIMER in-
dicator will light up to indicate that the TIMER has been
reactivated.
lf you
want
to deactivate
the
TIMER,
press
TIMER
OFF/REPEAT again so that the TIMER indicator goes out.
It is not necessary to summon
"TIMER page" to use the
TIMER OFF/REPEAT button. Furthermore, this button is ef-
fective even if the TV has been turned off.
To clear the TIMER setting, summon
"TIMER page" and
press CLEAR.
To reset, clear the setting and follow the steps on the
previous page from step 3.
HOW TO SET THE CHANNEL BLOCK
Make sure that the clock has been set correctly before set-
ting the channel BLOCK.
Ex. To set the BLOCK for a program which begins at 9:30
AM on channel 8, follow the steps below.
1 Press TIMER/BLOCK three times to change from "nor-
mai page" to "BLOCK page."
"BLOCK page"
(indications in red)
8:05pm
2 Press 0, 9, 3, 0, ENTER (0 necessary).
Numbers will "wink" to indicate that the time has been
set.
Press 8, ENTER (0 not necessary).
Number will "wink" to indicate that the channel has
been set.
Press the ANT/AUX button to check which channel you
have selected. To select a pay cable TV channel, press
the ANT/AUX button until on-screen "AUX" indicator ap-
pears for a few seconds.
The BLOCK
has now been set.
If you have made a mistake, press CLEAR and return
to step 2.
At the preset time, the picture of the selected channel will
be blocked from view and the sound will be muted.
A red "BLOCKED"
indication will appear on the screen
while the channel is blocked.
Normal
reception will be resumed after 12 hours.
To return to normal reception while the channel is block-
ed, recall "BLOCK
page" and press CLEAR.
The BLOCK setting blocks a specified channel for the same
12-hour period everyday.
To clear the BLOCK setting, summon "BLOCK page" and
press CLEAR.
To reset, clear the setting and follow the steps above from
step 2.
13
Advertisement
Table of Contents
