Table of Contents
Advertisement
How to Set the Internal Ciock
1 Press TIMER/BLOCK
once to change from
"normal page" to "clock
page."
BE: Blom
"clock page"
08:05pm
2 Press 0, 8, 0, 5, AM/PM
(0 necessary).
3 If you have performed
the operation correctly,
press ENTER.
The numbers will "wink"
to indicate that the clock
has been set. (The 0 in
front will disappear.)
The "AM"/"PM" indication will disappear after 2
seconds.
To reset the clock, summon "clock page" and press
CLEAR before the "AM'/"PM*" indication disappears.
Then follow the steps above from step 2.
12:00 AM stands for midnight.
12:00 PM stands for noon.
How to Set the Channel Block
1 Press TIMER/BLOCK
three times to change
from "normal page" to
, We
7
LOCK)
BLOCK page.
:
m CH. BOS
"BLOCK page"
(indications in red)
2 Press 0, 9, 3, 0, ENTER (0
necessary).
Numbers will "wink" to
indicate that the time
has been set.
Press 8, ENTER (0 not
necessary).
Numbers will "wink" to
indicate that the channel
has been set.
The BLOCK has now been set.
If you have made a mistake, press CLEAR and return to
step 2.
At the preset time, the picture of the selected channel will
be blocked from view and the sound will be muted. A red
"BLOCKED" indication will appear on the screen while the
channel is blocked.
Normal reception will be resumed after 12 hours.
To return to normal reception while the channel is blocked,
recall "BLOCK page" and press CLEAR.
The BLOCK setting blocks a specified channel for the
same 12-hour period everyday.
To clear BLOCK setting, summon "BLOCK page" and
press CLEAR.
To reset, clear the setting and follow the steps above from
step 2.
15
Advertisement
Table of Contents
