Stopping An Alarm Of Station Common; Stopping The Unauthorized Status Change Blinking - Toshiba GSC1000-C Operation Manual

Stopping an Alarm of Station Common

4.6
How to stop an alarm of Station Common from the main menu bar is indicated below.
 If the "Station Common Alarm Reset" button is clicked when no alarm is sounding, nothing is
processed.
 The common alarm on the system monitoring screen and on the station common alarm panel is
stopped by the alarm reset operation from the system monitoring screen. Also, by the alarm reset
operation from the station common panel, the common alarm on the station common panel and on
the system monitoring screen goes off.

Stopping the Unauthorized Status Change Blinking

4.7
How to stop the device symbol that is blinking to notify the unauthorized status change is
indicated below.
 When no blinking symbol exists, nothing is changed even if the "Stop Blink" button is clicked.
1) When an alarm is activated and sounds in
Station Common, the alarm sound is stopped by
clicking the "Station Common Alarm Reset"
button in the main menu bar.
1) When any site status change occurs, the device
symbol on the single line diagram blinks.
2) Click the "Stop Blink" button in the main menu
bar.
3) All device symbols on the single line diagram
stop blinking.
(The device symbol currently selected does not
stop blinking.)
45
6F2M2000