Roland DM-80 Owner's Manual page 31

SPECIFICATIONS
ANALOG I/O
DIGITAL I/O
GENERAL
INPUT CONNECTORS
1/4" 3-conductor phone jacks, balanced or unbalanced
INPUT LEVELS
+4 dBm
INPUT IMPEDANCE
44k Ohms Balanced / 22k Ohms Unbalanced
Recommended Source Impedance <2K Ohms
INPUT A/D CONVERTERS
64x oversampling, delta-sigma converter, 16-bit linear
OUTPUT CONNECTORS
1/4" 3-conductor phone jacks, balanced or unbalanced
OUTPUT LEVELS
+4 dBm Balanced /-2 dBm Unbalanced
NON-CLIP MAXIMUM OUTPUT LEVEL
+22 dBm
OUTPUT IMPEDANCE
200 Ohms Balanced / 100 Ohms Unbalanced
OUTPUT D/A CONVERTERS
8x oversampling, 20-bit linear
0 dBm = 0.775 Vrms
CLICK OUTPUT
2-conductor, unbalanced; 470 Ohms Impedance, 5ppv
INTERFACE TYPE
AES/EBU Consumer (CP-340 Type II) standard
XLR or Coaxial
CD and DAT compatible
SAMPLING FREQUENCY:
48 kHz, 44.1 kHz, 32 kHz (selectable)
FREQUENCY RESPONSE
10 Hz - 22 kHz (-0.2dB~+0.3dB)
SIGNAL TO NOISE RATIO
Mix Output: >96 dB
Individual Outputs: >96 dB
DYNAMIC RANGE
>96 dB (one track at rated output)
ROLAND DM-80-4 / DM-80-8 * OWNER'S MANUAL 29