Table of Contents
Advertisement
FILM LOADING
1. Open the back cover by sliding the back cover
release lever in the direction of the arrow.
{Turn the main switch off.)
2. Place the film cartridge into the film chamber
by first fitting its flat side on the top of the
rewind shaft.
• Be sure to load or unload the film in a shady
spot, or shield the camera and film from direct
sunlight with your body. While doing this, take
care not to put dust, stains, etc. on the lens.
S&Do not bend these DX-information pins, and
keep them free from dirt, dust or scratches.
7
Advertisement
Table of Contents
