Pentax IQZoom 60 Operating Manual page 29

Hide thumbs Also See for IQZoom 60:
Table of Contents

Advertisement

Switching the mode
Each time you depress the MODE button G with
your fingernail, the mode in the LCD panel O
switches from "Year-Month-Day" to "Month-Day-^
Year" to "Day-Month-Year" to "Day-Hour-Minute"
to
_/' Stop depressing the button when the
desired mode appears in the panel. "."
indicates no data are imprinted.
Adjusting the data
• Depressing the SELECT button O at first, and
the display will switch from any mode to "Hour:
Minute" with the " : " mark flickering. Each time
you depress the SELECT button
O.
the flicker
moves from " : *' to "Minute" to "Hour" to "Day"
to "Month" to "Year." Make the display you wish
to adjust, flicker.
• Depress the ADJUST button O for changing
the digits of the display you wish to adjust.
The digit advances one by one each time you
depress the ADJUST button O
If You keep it
depressed, the digit will, in a second or two,
advance continuously.
Adjusting the second
#f
1.
Depress the
SELECT button
O,
and":
will
flicker
2. Depress the ADJUST button
O
according to
a
time-signal,
and " : " will stop flickering
for an instant, setting the second to zero.
Adjusting "Hour:Minute" and "Year-Month-
Day"
1. Make any digit or digits of the hour, minute,
year, month, and day (which you wish to
adjust) flicker by depressing the SELECT
button 0
2. Set the digit or digits correctly by depressing
the ADJUST button
O-
Year = 87—19 {1987 — 2019)
Month =1—12
Day = 1—31
Hour = 0 — 23
Minute = 00 — 59
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iqzoom 60 date

Table of Contents