Table of Contents
Advertisement
TO PLAY LD/CDV/CD
Set the TV to the video-use
channel (the vacant channel
in your area) or select the
appropriate video signal input.
(See page 10.)
When a stereo
system
is
used for audio listening:
Turn on the power
of the
amplifier,
and set its input
selector to the proper position
for listening to the CLD-1450,
POWER
3 With the STOP/OPEN
button, open the disc table.
Front panet
STOP / OPEN
]
Remote control unit
such as "CD".
Discs marked with the Cag mark
If the picture is not clear:
Discs marked Ca are recorded with the CX noise reduction system
1. Set your TV to the channel used for disc playback,
for powerful audio reproduction with little noise,
2. Start disc playback.
The CX indicator on the front panel lights when such a disc is
3. Adjust your TV so that a clear picture is obtained.
played.
16
<VRB1022>
Advertisement
Table of Contents
