Full Warning; Audio Alert Only Operation - Uniden LRD6199SWS Operating Manual

Full Warning

When the LRD 6199SWS detects a radar, laser, or safety warning signal,
it emits a distinct warning tone and the corresponding alert LEDs
(X, K, Ka, L, or SWS) will light and blink. The blink rate of the LEDs
increases and the signal strength meter LEDs light successively as the
signal source comes closer.

Audio Alert Only Operation

Press the AUDIO button for Audio Alert Only operation.
CITY
MUTE
AUDIO
When Audio Alert Only is selected, the visual alert and signal strength
meter are disabled. In this mode, all lighted LEDs will dim. Press the
AUDIO button again for the Full Alert (audio and visual) Mode.
(Do not set the Volume control at minimum when in Audio Alert Only
because there will be no alert.)
Note: The audio alert tones for the 3 radar bands and laser are all
different.
13