Pin Tucking; Thread And Fabric; Machine Setting; Sewing - Janome 6234XL Instruction Book

1
40
PIN TUCKING
• Refer to page 36 (Narrow Hemming) for thread
tension balance adjustment.
CD
Pin tucking
Thread and Fabric
Fabric
Thread
Needle thread on the Synthetic : No. 60-80
Light to
right
Silk
: No. 50-80
Medium
Upper looper thread
Synthetic : No. 60-100
Fabric
Lower looper thread Silk : No. 50-100
Machine Setting
CD
Remove the needle on the left-hand side
®
Upper knife : Down
@
Needle plate setting knob: R
@
Lower looper pre-tension setting slider : STD
@
Changeable thread guide : 3/4
Sewing
Turn off the power switch.
Remove the needle on the left-hand side.
Deactivate the upper knife.
!
Turn on the power switch, then sew the folded edge while
I
guiding along the guide line.
II
CD
Folded edge
r
®
Guide line on the needle plate
I
®
Right needle position line on the presser foot
I.I
@)
Left needle position line on the presser foot
®
Right side of fabric
Open the fold flat and press the pin tucks to. one side.
NOTE:
After you finish sewing.return the upper knife
to rhe original position.
@Pin tucking
Ii
'
i
'
I
I
I