Table of Contents
Advertisement
OPERATION
20
Using Wireless Remote
Control
Operating with the Wireless
Remote Control
Point the wireless remote control towards the
signal receiver at the right side of the appliance to
operate it.
NOTE
• The wireless remote control may operate other
electronic devices if it is directed towards them.
Make sure to point the wireless remote control
towards the appliance signal receiver.
• For proper operation, use a soft cloth to clean
the signal transmitter and receiver.
• If a function included on the remote is not
supported on the appliance, the appliance may
not indicate this by buzzing. Exceptions include
the Adjusting the Left-Right Direction , Energy
Display and Air Purification functions.
Cooling, Auto,
Dehumidification, Fan Mode
You can change the operating mode when the
appliance is turned on.
1
Turn the appliance on.
2
Press the MODE button repeatedly to select
the desired mode.
Icon
Cooling Mode
Cool air blows from the air outlets.
Auto Mode
The product adjusts the airflow
automatically.
Dehumidification Mode
This function removes moisture in
indoor air.
Fan Mode
This function circulates the air
without heating or cooling it.
3
Press the
a
or
b
temperature.
• Cooling Mode: Set the temperature from 18
7
to 30
7
.
• Auto Mode: Each press changes the
temperature as follows: -2
2
&
• Dehumidification, Fan Mode: There is no
temperature control.
Description
button to set the desired
-1
0
&
&
1
&
Advertisement
Table of Contents
