Onkyo TX-NR828(B) Service Manual page 18

OPERATION CHECK-6
2.TEST MODE(3/4)
2-2. TEST MODE FOR OPERATION(Continue)
Auto Measurement Mode
TEST DSP Output ch
No.
4-00 ALL
4-01 ALL
4-02 ALL
4-03 SW
4-04 FL,FR
4-05 FR,C,SL,SR,SBL,SBR,SW
4-06 FL,C,SL,SR,SBL,SBR,SW
4-07 FL,FR,SL,SR,SBL,SBR,SW
4-08 FL,FR,C,SR,SBL,SBR,SW
4-09 FL,FR,C,SL,SBL,SBR,SW
4-10
FL,FR,C,SL,SR,SBR,SW
4-11
FL,FR,C,SL,SR,SBL,SW
4-12
FL,FR,C,SL,SR,SBL,SBR
4-13
ALL
4-14 ALL
4-15 ALL
4-16 ALL
4-21 FL
4-22 FR
4-23 C
4-24 SL
4-25 SR
4-26 SBL
4-27 SBR
4-28 FL
4-29 FR
4-30 C
4-31 SL
4-32 SR
4-33 SBL
4-34 SBR
4-35 ALL
4-36 "FL,FR,C,SL,SR"
4-37 C,SL,SR,SBL,SBR
4-38 *7
*3 : When TEST No. 4-21
*4 : The following signal is putted out at all channel continuously in TEST4-35
2 mS 2 mS
*5 : VOLH is detected and H/L of SEC1H is changed.
A detection level is the same as the normal mode.
When it is detected, light "FM STEREO" on FL TUBE.
*7 : In TEST4-38, some character is displayed while pushing down some button. Another character shall be displayed
by each button.
TX-NR626/727/828/ HT-RC560/ DTR-30.5/40.5/50.5
DSP Output DSP Config. Master Vol.
Frequency Output
Voltage
1kHz -20dBFS Y/L/L/L/L 64(Ref)
30Hz -20dBFS Y/L/L/L/L 64(Ref)
20kHz -20dBFS Y/L/L/L/L 64(Ref)
30Hz -20dBFS N/L/L/L/L 58(76)
30Hz -20dBFS N/L/L/L/L 64(Ref)
10kHz -20dBFS Y/L/L/L/L 64(Ref)
10kHz -20dBFS Y/L/L/L/L 64(Ref)
10kHz -20dBFS Y/L/L/L/L 64(Ref)
10kHz -20dBFS Y/L/L/L/L 64(Ref)
10kHz -20dBFS Y/L/L/L/L 64(Ref)
10kHz -20dBFS Y/L/L/L/L 64(Ref)
10kHz -20dBFS Y/L/L/L/L 64(Ref)
30Hz -20dBFS Y/L/L/L/L 64(Ref)
1kHz -20dBFS Y/L/L/L/L 64(Ref)
30Hz -20dBFS Y/L/L/L/L 64(Ref)
1kHz -20dBFS Y/L/L/L/L Min(Min)
30Hz -20dBFS Y/L/L/L/L Min(Min)
+DC +Max Y/L/L/L/L Max(Max)
-DC -Max Y/L/L/L/L Max(Max)
+DC +Max Y/L/L/L/L Max(Max)
-DC -Max Y/L/L/L/L Max(Max)
+DC +Max Y/L/L/L/L Max(Max)
-DC -Max Y/L/L/L/L Max(Max)
+DC +Max Y/L/L/L/L Max(Max)
-DC -Max Y/L/L/L/L Max(Max)
+DC +Max Y/L/L/L/L Max(Max)
-DC -Max Y/L/L/L/L Max(Max)
+DC +Max Y/L/L/L/L Max(Max)
-DC -Max Y/L/L/L/L Max(Max)
+DC +Max Y/L/L/L/L Max(Max)
-DC -Max Y/L/L/L/L Max(Max)
Pulse Max Y/L/L/L/L 58(76)
1kHz 0dBFS Y/L/L/L/L 64(Ref)
1kHz 0dBFS Y/L/L/L/L 64(Ref)
34 is setted, DC votage is putted out immediately at each channel. (within 100msec.)
20 mS
Speaker etc.
Relay
F/CS/SB *6 DSP Gain
F/CS/SB *6 DSP Freq.Response
F/CS/SB *6 DSP Freq.Response
F/CS/SB *6 Characteristic(1)
F/CS/SB *6 Characteristic(2)
F/CS/SB Mute:FL *6 Separation
F/CS/SB Mute:FR *6 Separation
F/CS/SB Mute:C *6 Separation
F/CS/SB Mute:SL *6 Separation
F/CS/SB Mute:SR *6 Separation
F/CS/SB Mute:SBL *6 Separation
F/CS/SB Mute:SBR *6 Separation
F/CS/SB Mute:SW *6 Separation
F/CS/SB *mut on *6 Muting
F/CS/SB *mut on *6 Muting
F/CS/SB *6 Volume Max.Attenuation
F/CS/SB *6 Volume Max.Attenuation
F/CS/SB *1,*3 +DC Protect
F/CS/SB *1,*3 -DC Protect
F/CS/SB *1,*3 +DC Protect
F/CS/SB *1,*3 -DC Protect
F/CS/SB *1,*3 +DC Protect
F/CS/SB *1,*3 -DC Protect
F/CS/SB *1,*3 +DC Protect
F/CS/SB *1,*3 -DC Protect
F/CS/SB *1,*3 +DC Protect
F/CS/SB *1,*3 -DC Protect
F/CS/SB *1,*3 +DC Protect
F/CS/SB *1,*3 -DC Protect
F/CS/SB *1,*3 +DC Protect
F/CS/SB *1,*3 -DC Protect
F/CS/SB *1,*4 Current Protect
F/CS/SB vol=64 VOLH DET,FAN Low
F/CS/SB *5 VOLH DET,FAN High
Key Test,SEC1H="L"
Max
Max