IBM 5218 Setup Procedures page 4

o
PREFACE
This manual describes the procedures used to set up the IBM 5218 Printwheel
Printer after the printer has been unpacked and placed where you intend to
use it. No special skills or tools are required to set up the printer. With
this manual, you should be able to set up and check out your printer within a
short period of time.
AUDIENCE
This manual is intended for customer personnel who are responsible for
setting up the IBM 5218 Printwheel Printer.
CONTENTS
This manual has five sections:
• IISec tion 1. Setup and Checkout Procedure for the IBM 5218
•
Pri ntwhee
1
Pri nter,
II
conta ins instruct ions for comp
1
et i ng the
unpacking of the printer, attaching the power cord, and checking
out the printer.
"Section 2. Attaching the Paper Support Table," contains
instructions for attaching the optional Paper Support Table.
• IISection 3. IBM Sheet-Feed Paper Handler,1I contains instructions
for attaching the optional IBM Sheet-Feed Paper Handler, loading
paper, doing a print test, and removing the IBM Sheet-Feed Paper
Handler.
• IISection 4. IBM Tractor Feed," contains instructions for attaching
the IBM Tractor Feed, loading paper, doing a print test, and
removing the IBM Tractor Feed.
• IISection 5. Printer Cable Attachment,1I contains instructions for
attaching the printer cable to the IBM Displaywriter System.
PREREQUISITE PUBLICATION
The
Customer Planning Guide for the IBM Displaywriter System,
G544-0852,
provides information needed to successfully prepare for the arrival and setup
of the system. The guide discusses such topics as system component sizes and
weights, furniture dimensions, supplies, and physical, electrical, and
environmental requirements of the system.
RELATED PUBLICATION
IBM Displaywriter System Customer Setup Guide,
G544-0858.
Preface iii