Testing The Scanner - UMAX Technologies Astra 2400S Operation Manual

Testing the Scanner

Note: Before proceeding with the steps below, please complete the hardware installation. Refer to the
Quick Start Guide included with the scanner.
The scanner automatically performs a simple self-test each time it is turned on to help spot major system
errors in the scanner itself. Once the scanner has been unpacked and the shipping restraint has been
removed, the scanner is ready to perform this test.
To start the scanners self-test, do the following:
1. Unlock the Optical Assembly Restraint
2. Connect the power cord to a wall outlet.
3. Connect the power cord to the scanner.
4. Turn on the power.
When the test is initiated, the ready and option (ADF/UTA) indicators will flash once and the ready
indicator will blink. When the test is completed, the ready indicators will glow steadily.
7