Table of Contents
Advertisement
The system will display the
recognised number and repeat it
vocally.
If the number is complete, say
"Call".
If the number is incomplete, say
the missing digits and at the end
say "Call".
The system will call the number
displayed.
To end the call, press
more than 1 second.
To cancel dialling the phone
number, say "Cancel".
To ask the system to repeat the
recognised number, say
"Repeat". If no phone number
was composed, the system says
that no number is available.
If it repeats the correct phone
number, say "Call" to make
the call.
38
NOTE While dialling a number using
voice commands, it is important that
the noise inside the passenger
compartment is as low as possible
and the occupants of the car do not
speak while you say the number to the
system. Since the system operates
irrespective of who is speaking, it will
recognise other voices; there is
therefore the risk that some numbers
for
are recognised incorrectly, added to
correct numbers or not recognised.
CALL A NUMBER USING
THE MOBILE PHONE
KEYPAD
?
With this system, you can also
dial a phone number using the
mobile phone keypad and then
continue the phone conversation
using the hands-free system.
To do this, the phone must be
paired and within the operating
range of the car hands-free
system.
To dial a phone number using the
mobile phone keypad, proceed
as follows:
❒
Dial the phone number using
the mobile phone keypad and
make the call as normal for the
mobile phone.
❒
Dial the phone number using
the mobile phone keypad and
make the call as normal for the
mobile phone.
❒
Have the phone conversation
using the hands-free system.
❒
To end the call, press
for
more than 1 second or close
the call using the
corresponding mobile phone
controls.
Advertisement
Table of Contents
