US Robotics USR5453 Quick Installation Manual page 8

Click Next to display the page that will start the configuration process.
3.
4. In the Detection Utility window, click Administration Console.
For Non-Windows Operating Systems
1. Using the configuration program for the networking device, such as a router, to
which the access point is connected, view the device's client list.
2. Find the LAN MAC address of the access point in the client list.
3. Note the IP address that corresponds to the LAN MAC address of the access point.
4. Open a Web browser, enter the IP address in the address or navigation bar, and click
Enter.
Step 3: Configure Basic Settings.
Before giving you access to the Web User Interface, the system prompts you for a user name
and password:
Enter the password and click OK. The Basic Settings page appears.
4
The default value for both User Name
and Password is admin.
Both of these fields are case sensitive.